DUVbox DN25 2x3 L

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

rMIX DN25 2x3 LL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 6.2 • V'max[250mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

DUVbox DN25 2x3 R

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

rJET DN25 2x4 RH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!) at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 5.6 • V'max[100mbar] = 1.8m³/h
Q'max[20K] = 42kW
Mixing circuit (LT) with ST DN25:
Kvs = 5.7 • V'max[100mbar] = 1.8m³/h
Q'max[10K] = 21kW

rMIX DN32 3x2 VL

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rMIX DN25 2x4 LH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25 2x4 RH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25 2x4 LT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit

Performance data

Downstream assembly (HT):
Kvs = 6.5 • V'max[100mbar] = 2.1m³/h
Q'max[20K] = 49kW
Additional mixing circuit (NT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25 2x4 RT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit

Performance data

Downstream assembly (HT):
Kvs = 6.5 • V'max[100mbar] = 2.1m³/h
Q'max[20K] = 49kW
Additional mixing circuit (NT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rSYS DN25 2x4 LH

For highly efficient utilisation of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control at a condensing boiler, a stratified storage tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rSYS DN25 2x4 RH

For highly efficient utilisation of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control at a condensing boiler, a stratified storage tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rSYS DN25 2x4 LT

TWIN assembly for the expansion of a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control

Performance data

Downstream assembly (HT):
Kvs = 6.5 • V'max[100mbar] = 2.1m³/h
Q'max[20K] = 49kW
Additional mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rSYS DN25 2x4 RT

TWIN assembly for the expansion of a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control

Performance data

Downstream assembly (HT):
Kvs = 6.5 • V'max[100mbar] = 2.1m³/h
Q'max[20K] = 49kW
Additional mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rMIX DN25 3x2 LL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW • Q'max[10K] = 23kW

rMIX DN25 3x2 LR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW • Q'max[10K] = 23kW

rMIX DN25 3x2 RR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW • Q'max[10K] = 23kW

rMIX DN25 3x2 RL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW • Q'max[10K] = 23kW

rSYS DN25 3x2 LL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[20K] = 70kW • Q'max[10K] = 35kW

rSYS DN25 3x2 LR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[20K] = 70kW • Q'max[10K] = 35kW

rSYS DN25 3x2 RR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[20K] = 70kW • Q'max[10K] = 35kW

rSYS DN25 3x2 RL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[20K] = 70kW • Q'max[10K] = 35kW

DUVbox DN25 2x4 L

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

DUVbox DN25 2x4 R

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

rSYS DN25 2x3 LL

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

rSYS DN25 2x3 RR

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

rJET DN25 2x4 LH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!) at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 5.6 • V'max[100mbar] = 1.8m³/h
Q'max[20K] = 42kW
Mixing circuit (LT) with ST DN25:
Kvs = 5.7 • V'max[100mbar] = 1.8m³/h
Q'max[10K] = 21kW

rJET DN25 2x4 LT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!)

Performance data

Downstream assembly (HT):
Kvs = 6.5 • V'max[100mbar] = 2.1m³/h
Q'max[20K] = 49kW
Additional mixing circuit (NT) with ST DN25:
Kvs = 5.7 • V'max[100mbar] = 1.8m³/h
Q'max[10K] = 21kW

rSYS DN25 2x3 LR

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

rJET DN25 2x4 RT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!)

Performance data

Downstream assembly (HT):
Kvs = 6.5 • V'max[100mbar] = 2.1m³/h
Q'max[20K] = 49kW
Additional mixing circuit (NT) with ST DN25:
Kvs = 5.7 • V'max[100mbar] = 1.8m³/h
Q'max[10K] = 21kW

rSYS DN25 2x3 RL

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.4 • V'max[250mbar] = 4.7m³/h
Q'max[20K] = 109kW • Q'max[10K] = 55kW

rMIX DN25 3x3 L

For highly efficient two-zone unloading of a buffer tank through a mixed heating circuit with an additional unmixed flow connection for hot water preparation (charging circuit).

Performance data

Charging circuit (HT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25 3x3 R

For highly efficient two-zone unloading of a buffer tank through a mixed heating circuit with an additional unmixed flow connection for hot water preparation (charging circuit).

Performance data

Charging circuit (HT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rSYS DN25 2x4+UV L

For the highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) by means of highly efficient operation of a system separation via flow control on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rSYS DN25 2x4+UV R

For the highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) by means of highly efficient operation of a system separation via flow control on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rMIX DN25s 2x4 LH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 11.9 • V'max[100mbar] = 3.8m³/h
Q'max[20K] = 88kW
Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN25s 2x4 RH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 11.9 • V'max[100mbar] = 3.8m³/h
Q'max[20K] = 88kW
Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN25s 2x4 LT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit

Performance data

Downstream assembly (HT):
Kvs = 13.9 • V'max[100mbar] = 4.4m³/h
Q'max[20K] = 102kW
Additional mixing circuit (NT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN25s 2x4 RT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit

Performance data

Downstream assembly (HT):
Kvs = 13.9 • V'max[100mbar] = 4.4m³/h
Q'max[20K] = 102kW
Additional mixing circuit (NT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN25 2x4+3mix L

For discharging a stratified tank in a mixed low-temperature circuit (2nd mixed circuit) with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW
2nd mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25 2x4+3mix R

For discharging a stratified tank in a mixed low-temperature circuit (2nd mixed circuit) with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW
2nd mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25s 3x2 LL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rSYS DN25 2x4+3mix L

For discharging a stratified storage tank in a mixed low-temperature circuit (2nd mixed circuit) by means of high-efficiency operation of a system separation via flow control with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW
2nd mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rMIX DN25s 3x2 LR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rSYS DN25 2x4+3mix R

For discharging a stratified storage tank in a mixed low-temperature circuit (2nd mixed circuit) by means of high-efficiency operation of a system separation via flow control with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW
2nd mixing circuit (LT) for ST on-site:
Kvs = 9.4 • V'max[100mbar] = 3m³/h
Q'max[10K] = 35kW

rMIX DN25s 3x2 RR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rMIX DN25s 3x2 RL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rSYS DN25s 2x4 LH

For highly efficient utilisation of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control at a condensing boiler, a stratified storage tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 11.9 • V'max[100mbar] = 3.8m³/h
Q'max[20K] = 88kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

rSYS DN25s 2x4 RH

For highly efficient utilisation of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control at a condensing boiler, a stratified storage tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 11.9 • V'max[100mbar] = 3.8m³/h
Q'max[20K] = 88kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

rSYS DN25s 2x4 LT

TWIN assembly for the expansion of a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control

Performance data

Downstream assembly (HT):
Kvs = 13.9 • V'max[100mbar] = 4.4m³/h
Q'max[20K] = 102kW
Additional mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

rSYS DN25s 2x4 RT

TWIN assembly for the expansion of a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control

Performance data

Downstream assembly (HT):
Kvs = 13.9 • V'max[100mbar] = 4.4m³/h
Q'max[20K] = 102kW
Additional mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

DUVbox DN25s 2x3 L

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 10.1 • V'max[250mbar] = 5.1m³/h
Q'max[20K] = 119kW • Q'max[10K] = 59kW

DUVbox DN25s 2x3 R

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 10.1 • V'max[250mbar] = 5.1m³/h
Q'max[20K] = 119kW • Q'max[10K] = 59kW

DUVbox DN25s 2x4 L

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 10.1 • V'max[250mbar] = 5.1m³/h
Q'max[20K] = 119kW • Q'max[10K] = 59kW

rSYS DN25s 3x2 LL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

DUVbox DN25s 2x4 R

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority hot water preparation

Performance data

Producer circuit (LT):
Kvs = 10.1 • V'max[250mbar] = 5.1m³/h
Q'max[20K] = 119kW • Q'max[10K] = 59kW

rSYS DN25s 3x2 LR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

rSYS DN25s 3x2 RR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

rSYS DN25s 3x2 RL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

DUVbox DN25s 2x4 VL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority domestic hot water preparation (three-chamber manifold)

Performance data

Producer circuit (LT):
Kvs = 10.4 • V'max[250mbar] = 5.2m³/h
Q'max[20K] = 121kW • Q'max[10K] = 60kW

DUVbox DN25s 2x4 VR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority domestic hot water preparation (three-chamber manifold)

Performance data

Producer circuit (LT):
Kvs = 10.4 • V'max[250mbar] = 5.2m³/h
Q'max[20K] = 121kW • Q'max[10K] = 60kW

DEFbox DN25 2x2 LT

TWIN module for expanding a rendeMIX DUVbox 2x3 or 2x4 for draining a defrost buffer located in the return of a heat pump by switching the heat pump flow to its own return.

DEFbox DN25 2x2 RT

TWIN module for expanding a rendeMIX DUVbox 2x3 or 2x4 for draining a defrost buffer located in the return of a heat pump by switching the heat pump flow to its own return.

rSYS DN25s 2x3 LL

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.7 • V'max[250mbar] = 4.9m³/h
Q'max[20K] = 114kW • Q'max[10K] = 57kW

rSYS DN25s 2x3 RR

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.7 • V'max[250mbar] = 4.9m³/h
Q'max[20K] = 114kW • Q'max[10K] = 57kW

rSYS DN25s 2x3 LR

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.7 • V'max[250mbar] = 4.9m³/h
Q'max[20K] = 114kW • Q'max[10K] = 57kW

rSYS DN25s 2x3 RL

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 9.7 • V'max[250mbar] = 4.9m³/h
Q'max[20K] = 114kW • Q'max[10K] = 57kW

rMIX DN25s 3x3 L

For highly efficient two-zone unloading of a buffer tank through a mixed heating circuit with an additional unmixed flow connection for hot water preparation (charging circuit).

Performance data

Charging circuit (HT):
Kvs = 11.9 • V'max[100mbar] = 3.8m³/h
Q'max[20K] = 88kW
Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rSYS DN25s 2x4+UV L

For the highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) by means of highly efficient operation of a system separation via flow control on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

rMIX DN25s 3x3 R

For highly efficient two-zone unloading of a buffer tank through a mixed heating circuit with an additional unmixed flow connection for hot water preparation (charging circuit).

Performance data

Charging circuit (HT):
Kvs = 11.9 • V'max[100mbar] = 3.8m³/h
Q'max[20K] = 88kW
Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rSYS DN25s 2x4+UV R

For the highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) by means of highly efficient operation of a system separation via flow control on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

rMIX DN25s 3x2 VL

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rMIX DN25s 3x2 VR

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rMIX DN32 3x2 VR

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rMIX DN32 2x4 L

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 15,8 • V'max[100mbar] = 5m³/h
Q'max[20K] = 116kW
Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[10K] = 70kW

rMIX DN32 2x4 R

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 15,8 • V'max[100mbar] = 5m³/h
Q'max[20K] = 116kW
Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[10K] = 70kW

rMIX DN32 3x2 VLR

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rMIX DN32 3x2 VRL

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rMIX DN32 2x3 LL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 18.9 • V'max[250mbar] = 9.5m³/h
Q'max[20K] = 221kW • Q'max[10K] = 110kW

rMIX DN32 2x3 RR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 18.9 • V'max[250mbar] = 9.5m³/h
Q'max[20K] = 221kW • Q'max[10K] = 110kW

rMIX DN32 2x3 LR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 18.9 • V'max[250mbar] = 9.5m³/h
Q'max[20K] = 221kW • Q'max[10K] = 110kW

rMIX DN32 2x3 RL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 18.9 • V'max[250mbar] = 9.5m³/h
Q'max[20K] = 221kW • Q'max[10K] = 110kW

rSYS DN25s 3x2 VL

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold) by means of high-efficiency operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

rMIX DN32 3x2 LL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rSYS DN25s 3x2 VR

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold) by means of high-efficiency operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

rMIX DN32 3x2 RR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rMIX DN32 3x2 LR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rMIX DN32 3x2 RL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit

Performance data

Mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[20K] = 140kW • Q'max[10K] = 70kW

rSYS DN32 3x2 LL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 12.7 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW • Q'max[10K] = 47kW

rSYS DN32 3x2 LR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 12.7 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW • Q'max[10K] = 47kW

rSYS DN32 3x2 RR

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 12.7 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW • Q'max[10K] = 47kW

rSYS DN32 3x2 RL

For highly efficient two-zone unloading of a buffer tank through a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 12.7 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW • Q'max[10K] = 47kW

rSYS DN32 2x3 LL

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 12.7 • V'max[250mbar] = 6.4m³/h
Q'max[20K] = 149kW • Q'max[10K] = 74kW

rSYS DN32 2x3 RR

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 12.7 • V'max[250mbar] = 6.4m³/h
Q'max[20K] = 149kW • Q'max[10K] = 74kW

rMIX DN25 2x3 RR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 6.2 • V'max[250mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

rSYS DN32 2x3 LR

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 12.7 • V'max[250mbar] = 6.4m³/h
Q'max[20K] = 149kW • Q'max[10K] = 74kW

rSYS DN32 2x3 RL

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control

Performance data

Producer circuit (HT-RLA) for ST on-site:
Kvs = 12.7 • V'max[250mbar] = 6.4m³/h
Q'max[20K] = 149kW • Q'max[10K] = 74kW

rMIX DN25 2x4+UV L

For highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25 2x4+UV R

For highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 12.5 • V'max[100mbar] = 2m³/h
Q'max[20K] = 47kW
Mixing circuit (LT):
Kvs = 6.2 • V'max[100mbar] = 2m³/h
Q'max[10K] = 23kW

rMIX DN25 2x3 LR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 6.2 • V'max[250mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

rMIX DN25 2x3 RL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 6.2 • V'max[250mbar] = 3.1m³/h
Q'max[20K] = 72kW • Q'max[10K] = 36kW

2valSYS DN25s 2x2 VL

For controlling a mixed high-temperature circuit by means of high-efficiency operation of a system separation via flow control, the return of which is used highly efficiently by a rendeMIX heat distribution system

Performance data

Throttle circuit (HT) for ST on-site:
Kvs = 16.3 • V'max[100mbar] = 5.2m³/h
Q'max[20K] = 121kW • Q'max[10K] = 60kW

rSYS DN32 3x2 VL

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold) by means of high-efficiency operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 12.7 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW • Q'max[10K] = 47kW

2valSYS DN25s 2x2 VR

For controlling a mixed high-temperature circuit by means of high-efficiency operation of a system separation via flow control, the return of which is used highly efficiently by a rendeMIX heat distribution system

Performance data

Throttle circuit (HT) for ST on-site:
Kvs = 16.3 • V'max[100mbar] = 5.2m³/h
Q'max[20K] = 121kW • Q'max[10K] = 60kW

rSYS DN32 3x2 VR

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold) by means of high-efficiency operation of a system separation via flow control

Performance data

Mixing circuit (LT) for ST on-site:
Kvs = 12.7 • V'max[100mbar] = 4m³/h
Q'max[20K] = 93kW • Q'max[10K] = 47kW

rMIX DN25s 2x4+3mix L

For discharging a stratified tank in a mixed low-temperature circuit (2nd mixed circuit) with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
2nd mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN25s 2x4+3mix R

For discharging a stratified tank in a mixed low-temperature circuit (2nd mixed circuit) with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
2nd mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN32 2x4+3mix L

For discharging a stratified tank in a mixed low-temperature circuit (2nd mixed circuit) with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 13.6 • V'max[100mbar] = 4.3m³/h
Q'max[20K] = 100kW
2nd mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[10K] = 70kW

rMIX DN32 2x4+3mix R

For discharging a stratified tank in a mixed low-temperature circuit (2nd mixed circuit) with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 13.6 • V'max[100mbar] = 4.3m³/h
Q'max[20K] = 100kW
2nd mixing circuit (LT):
Kvs = 18.9 • V'max[100mbar] = 6m³/h
Q'max[10K] = 70kW

rMIX DN25s 3x2 VLR

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rMIX DN25s 3x2 VRL

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[20K] = 95kW • Q'max[10K] = 48kW

rSYS DN25s 2x4+3mix L

For discharging a stratified storage tank in a mixed low-temperature circuit (2nd mixed circuit) by means of high-efficiency operation of a system separation via flow control with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
2nd mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

rSYS DN25s 2x4+3mix R

For discharging a stratified storage tank in a mixed low-temperature circuit (2nd mixed circuit) by means of high-efficiency operation of a system separation via flow control with highly efficient use of the return flow of a mixed high-temperature circuit (1st mixed circuit) with the lowest possible return flow temperature.

Performance data

1st mixing circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
2nd mixing circuit (LT) for ST on-site:
Kvs = 9.7 • V'max[100mbar] = 3.1m³/h
Q'max[10K] = 36kW

rMIX DN25s 2x3 VLR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit (three-chamber manifold).

Performance data

Producer circuit (HT-RLA):
Kvs = 12.9 • V'max[250mbar] = 6.5m³/h
Q'max[20K] = 151kW • Q'max[10K] = 76kW

rMIX DN25s 2x3 VRL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit (three-chamber manifold).

Performance data

Producer circuit (HT-RLA):
Kvs = 12.9 • V'max[250mbar] = 6.5m³/h
Q'max[20K] = 151kW • Q'max[10K] = 76kW

rMIX DN50 3x2 VL

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 28.3 • V'max[100mbar] = 8.9m³/h
Q'max[20K] = 208kW
Q'max[10K] = 104kW

rMIX DN50 3x2 VR

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold).

Performance data

Mixing circuit (LT):
Kvs = 28.3 • V'max[100mbar] = 8.9m³/h
Q'max[20K] = 208kW
Q'max[10K] = 104kW

rMIX DN50 2x3 VL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit (three-chamber manifold).

Performance data

Producer circuit (HT-RLA):
Kvs = 28.3 • V'max[250mbar] = 14m³/h
Q'max[20K] = 329kW
Q'max[10K] = 164kW

rMIX DN50 2x3 VR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit (three-chamber manifold).

Performance data

Producer circuit (HT-RLA):
Kvs = 28.3 • V'max[250mbar] = 14m³/h
Q'max[20K] = 329kW
Q'max[10K] = 164kW

rMIX DN50 3x3C VL

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase and separate flue gas condenser or two return connections (three-chamber manifold).

Performance data

Performance data will be published shortly

rMIX DN50 3x3C VR

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase and separate flue gas condenser or two return connections (three-chamber manifold).

Performance data

Performance data will be published shortly

Hbox DN25s 2x2 VL

For connecting an unmixed high-temperature circuit with additional hydraulic separator to maintain a minimum circulation in the heat generator in conjunction with a highly efficient rendeMIX heat distribution (two- or three-chamber manifold).

Hbox DN25s 2x2 VR

For connecting an unmixed high-temperature circuit with additional hydraulic separator to maintain a minimum circulation in the heat generator in conjunction with a highly efficient rendeMIX heat distribution (two- or three-chamber manifold).

DUVbox DN25s 2x3 VL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority domestic hot water preparation (three-chamber manifold)

Performance data

Producer circuit (LT):
Kvs = 10.4 • V'max[250mbar] = 5.2m³/h
Q'max[20K] = 121kW • Q'max[10K] = 60kW

DUVbox DN25s 2x3 VR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation in heating mode and with priority domestic hot water preparation (three-chamber manifold)

Performance data

Producer circuit (LT):
Kvs = 10.4 • V'max[250mbar] = 5.2m³/h
Q'max[20K] = 121kW • Q'max[10K] = 60kW

rMIX DN25s 2x3 LL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 12.9 • V'max[250mbar] = 6.5m³/h
Q'max[20K] = 151kW • Q'max[10K] = 76kW

rMIX DN25s 2x3 RR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 12.9 • V'max[250mbar] = 6.5m³/h
Q'max[20K] = 151kW • Q'max[10K] = 76kW

sBOX DN32 2x2 VL

For connection of an unmixed high-temperature circuit in conjunction with a highly efficient rendeMIX heat distribution (two- or three-chamber manifold).

Performance data

Direct heating circuit (HT):
Kvs = 22.6 • V'max[100mbar] = 7.2m³/h
Q'max[20K] = 167kW • Q'max[10K] = 84kW

sBOX DN32 2x2 VR

For connection of an unmixed high-temperature circuit in conjunction with a highly efficient rendeMIX heat distribution (two- or three-chamber manifold).

Performance data

Direct heating circuit (HT):
Kvs = 22.6 • V'max[100mbar] = 7.2m³/h
Q'max[20K] = 167kW • Q'max[10K] = 84kW

rMIX DN25s 2x4+UV L

For highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN25s 2x4+UV R

For highly efficient use of the return flow of an unmixed high-temperature circuit (charging circuit) controlled via a changeover valve in a mixed low-temperature circuit (mixing circuit) on a condensing boiler with minimum circulation

Performance data

Charging circuit (HT):
Kvs = 13.3 • V'max[100mbar] = 4.2m³/h
Q'max[20K] = 98kW
Mixing circuit (LT):
Kvs = 12.9 • V'max[100mbar] = 4.1m³/h
Q'max[10K] = 48kW

rMIX DN25s 2x3 LR

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 12.9 • V'max[250mbar] = 6.5m³/h
Q'max[20K] = 151kW • Q'max[10K] = 76kW

rMIX DN25s 2x3 RL

For highly efficient two-zone charging of a buffer storage tank by a heat generator with return temperature increase as a mixing circuit

Performance data

Producer circuit (HT-RLA):
Kvs = 12.9 • V'max[250mbar] = 6.5m³/h
Q'max[20K] = 151kW • Q'max[10K] = 76kW

rJET DN25s 2x4 LH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!) at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 9.2 • V'max[100mbar] = 2.9m³/h
Q'max[20K] = 67kW
Mixing circuit (LT) with ST DN25s:
Kvs = 7.2 • V'max[100mbar] = 2.3m³/h
Q'max[10K] = 27kW

rJET DN25s 2x4 RH

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit by means of highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!) at a condensing boiler, a stratified tank or a heat transfer station.

Performance data

Direct heating circuit (HT):
Kvs = 9.2 • V'max[100mbar] = 2.9m³/h
Q'max[20K] = 67kW
Mixing circuit (LT) with ST DN25s:
Kvs = 7.2 • V'max[100mbar] = 2.3m³/h
Q'max[10K] = 27kW

rJET DN25s 2x4 LT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!)

Performance data

Downstream assembly (HT):
Kvs = 13.9 • V'max[100mbar] = 4.4m³/h
Q'max[20K] = 102kW
Additional mixing circuit (NT) with ST DN25s:
Kvs = 7.2 • V'max[100mbar] = 2.3m³/h
Q'max[10K] = 27kW

rJET DN25s 2x4 RT

TWIN assembly for expanding a rendeMIX 2x4 assembly by an additional low-temperature mixing circuit with return use of the high-temperature circuit and highly efficient operation of a system separation via flow control from the differential pressure of the pump in the heat generator circuit (i.e. without an additional pump in the primary circuit of the system separation!)

Performance data

Downstream assembly (HT):
Kvs = 13.9 • V'max[100mbar] = 4.4m³/h
Q'max[20K] = 102kW
Additional mixing circuit (NT) with ST DN25s:
Kvs = 7.2 • V'max[100mbar] = 2.3m³/h
Q'max[10K] = 27kW