Assembly instructions

Assembly instructions: For specialist partners only.
Please log in here or register here

Actuator multi-way mixer: For specialist partners only.
Please log in here or register here

Spare parts drawing

Spare parts drawing For specialist partners only.
Please log in here or register here

Data sheet

001269_DBL_2021-11-04.pdf

GAEB

001269.D81

Tender text

Baunach article master data Version: 10.05.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX multi-port mixing manifold with 3/2-way tangential mixing valve DN25×G1½(a) MsGuss (adapter red), plug and cover Ms58

For highly efficient use of the return flow of high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank through a mixed circuit (three-chamber manifold) by means of high-efficiency operation of a system separation via flow control

Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s

Mixer assembly with 3 connections to the heat source, CuØ35×1, pipe distance to the heat source 100mm, pipe distance to the mixing circuit 200mm, DN32×G1½(a) flat.

2 integrated gravity brakes/backflow preventer, Dp10mbar

Mixing circuit (LT) for system separation on site: Kvs = 9.7 - V'max[100mbar] = 3.1m³/h - Q'max[20K] = 72kW - Q'max[10K] = 36kW - Leakage rate < 0,1%

5 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

5 Ball valve screw connections, DN32 passage, PN25, G1½(i)×Rp1¼ flat-sealing, stuffing box, spindle with square drive SW25

Insulating moulded tray EPP 40g/l, black, 300×450mm, quick assembly kit

Without pump flanges

Assembly does NOT include pump compensator - PAS L180 (Part No.: 001 338)

Assembly does not contain a pump

Model DN 25 - manifold assembly for manifold connection from RIGHT, PN 10bar, Tmax 120°C

ATTENTION: CANNOT BE USED WITHOUT SYSTEM SEPARATION!