Product search
2valSYS DN25s 2x2 VR
Accessories needed
|
ST DN25s AD200 P40 R 5001069 |
|
ST DN25s AD200 P40 R001067 |
Recommended accessories
Schl KuH DN32-50 set996167 |
ISO KuH DN32 G1½(i)xRp1¼996086 |
Configure product variant
Nominal width
Performance class
Kvs = 16.3 V'max[100mbar] = 5.2m³/h
Q'max[20K] = 121kW Q'max[10K] = 60kW
Flow direction producer
Pump flange
Product documentation
Assembly instructions
Assembly instructions: For specialist partners only.
Please log in here or register here
Actuator three-way mixer: For specialist partners only.
Please log in here or register here
Spare parts drawing
Spare parts drawing For specialist partners only.
Please log in here or register here
Data sheet
GAEB
Tender text
Baunach article master data Version: 10.05.24
BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology
rendeMIX 2-Wege-Drosselhahn DN32×G1½(a) Ms58, Küken und Deckel Ms58
For controlling a mixed high-temperature circuit by means of high-efficiency operation of a system separation via flow control, the return of which is used highly efficiently by a rendeMIX heat distribution system
Stellantrieb EMS 90-3P, 230V~ 50Hz 3,5VA 3-Punkt-Signal, 5Nm (240h), 90°, 70s, Adapter grau
Unmixed manifold assembly with 2 connections to the heat source, CuØ35×1, pipe distance to the heat source (manifold) 100mm, pipe distance to the 100mm, DN32×G1½(a) flat.
1 integrated gravity brake/backflow preventer, Dp10mbar
Throttle circuit (HT) for system separation on site: Kvs = 16.3 - V'max[100mbar] = 5.2m³/h - Q'max[20K] = 121kW - Q'max[10K] = 60kW - Leakage rate < 0,1%
2 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58
4 Kugelhahnverschraubungen, Durchgang DN32, PN25, G1½(i)×Rp1¼ flachdichtend, Stopfbuchse, Spindel mit 4-Kant Antrieb SW25
Insulating moulded tray EPP 40g/l, black, 300×450mm, quick assembly kit
Without pump flanges
Assembly does NOT include pump compensator - PAS L180 (Part No.: 001 338)
Assembly does not contain a pump
Model DN 25 - manifold assembly for manifold connection from RIGHT, PN 10bar, Tmax 120°C
ATTENTION: CANNOT BE USED WITHOUT SYSTEM SEPARATION!
Performance data
Throttle circuit (HT) for system separation on site: Kvs = 16.3 - V'max[100mbar] = 5.2m³/h - Q'max[20K] = 121kW - Q'max[10K] = 60kW - Leakage rate < 0,1%