Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of flow control technology

Thermostatic flow temperature limiter with adjustable minimum temperature and a fixed minimum flow rate of approx. 1%

For automatic hydraulic balancing of downstream condensing flue gas heat exchangers from boilers and CHP units, particularly in combination with our rMIX DN25 3×3 C loading station.

Consisting of:

1) Actively opening valve body VUO DN20 with fixed minimum flow rate DN20

Kvs = 3.2

V'max [60 mbar] = 0.8 m³/h<br/>Q'max = 19 kW [20 K]<br/>EPDM seal, inlet nipple R¾×Rp¾, outlet socket <br/>Conical threaded connection G1 PN 10 bar on the inlet side, Tmax 120°C (Part No. 996 004)<br/>2) Thermostat head with TK-WTF spiral immersion sensor

Setpoint range 20°C to 70°C

Capillary tube length 2 m, capillary tube seal: R½ compression fitting

Spiral immersion sensor length 125 mm, response time approx. 5 s<br/>CAUTION: Immersion sensor comes into contact with heating water—provide a shut-off valve on site!

PN 10 bar, Tmax 90°C (Part No. 996 005)

3) Black T-fitting, TsF ¾x¾x½ (Part No. 996 055)

Performance data