Assembly instructions

Assembly instructions: For specialist partners only.
Please log in here or register here

Actuator three-way mixer: For specialist partners only.
Please log in here or register here

Spare parts drawing

Spare parts drawing For specialist partners only.
Please log in here or register here

Data sheet

001343_DBL_2022-01-30.pdf

Tender text

Baunach article master data Version: 10.05.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX 2-Wege-Drosselhahn DN32×G1½(a) Ms58, Küken und Deckel Ms58

For controlling a mixed high-temperature circuit by means of high-efficiency operation of a system separation via flow control, the return of which is used highly efficiently by a rendeMIX heat distribution system

Stellantrieb EMS 90-3P, 230V~ 50Hz 3,5VA 3-Punkt-Signal, 5Nm (240h), 90°, 70s, Adapter grau

Unmixed manifold assembly with 2 connections to the heat source, CuØ35×1, pipe distance to the heat source (manifold) 100mm, pipe distance to the 100mm, DN32×G1½(a) flat.

1 integrated gravity brake/backflow preventer, Dp10mbar

Throttle circuit (HT) with VST DN25s: Kvs = 10.2 - V'max[100mbar] = 3.2m³/h - Q'max[20K] = 74kW - Q'max[10K] = 37kW - Leakage rate < 0,1%

2 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

4 Kugelhahnverschraubungen, Durchgang DN32, PN25, G1½(i)×Rp1¼ flachdichtend, Stopfbuchse, Spindel mit 4-Kant Antrieb SW25

Insulating moulded tray EPP 40g/l, black, 300×450mm, quick assembly kit

With pump flange G1½(i) for pump DN25 on the unmixed heating circuit flow (3)

Assembly includes ONE pump balancing piece - PAS L180 - with G1½(a)×G1½(i) fittings for balancing one pump DN25, length 180mm, insulated (part no.: 001 338).

Assembly does not contain a pump

Model DN 25 - manifold assembly for manifold connection from RIGHT, PN 10bar, Tmax 120°C

ATTENTION: CANNOT BE USED WITHOUT SYSTEM SEPARATION!