ISH Innovations special

Hans-Georg Baunach

Our knife stand
Dear Ladies and Gentlemen,
with our today's rendePOST we would like to inform you about the new products that we will be presenting at this year's ISH in Frankfurt/Main from 10 to 14 March 2015 in Hall 9.0 on our stand F61. Why don't you come and visit us! The opportunity is favourable to find out in person what we have in mind under the motto of this year's trade fair: "Energy efficiency plus"
And if you don't have the opportunity to visit us, our sales staff will be happy to arrange an appointment with you at your premises. The best thing to do now is to let us know your Appointment request by e-mail!
Have fun with "Energy efficiency plus"
The rendeMIX 250 gets a big brother - the rendeMIX 320
Normally you don't get a big brother, but a little one - but not with the rendeMIX 250.
Previously there was the rendeMIX Mixer groups under the type designation rMIX 250 In this nominal size, the mixers achieve a flow rate of 5m³/h with a pressure loss of 150mbar.
Our new distribution groups rendeMIX 320 with the same pressure loss already come to 8m³/h. At the same time, we have completely converted the module connections of our distributors to the Nominal diameter 32 expanded and the Gauge block of the heating circuit connections from 100mm to 200mm doubled.
Experience "Energy efficiency plus" in a new dimension at this year's ISH in Frankfurt/Main from 10 to 14 March 2015 in Hall 9.0 at our stand F61
The rendeMIX 3×4 plus - the ultimate solution on the buffer tank
For those of you who have ever had the pleasure of a rendeMIX 3×4 who have been able to experience this on a buffer cylinder know what I am talking about: doubling or tripling the usable buffer volume. The fact that such results really can be achieved with the methods used - return utilisation and two-zone discharge - has already been reported several times in the trade press, for example in the DKZ 10/2013 installation:
Doubled capacity with the same volume
However, this efficiency miracle is now available in half the space: the new rendeMIX 3×4 plus combines two mixers in one 45×45cm housing - a three-way mixer for a high-temperature circuit (usually radiators) and a rendeMIX-Mixer for the low temperature circuit (usually underfloor heating), which not only utilises the return flow of the high temperature circuit, but also drains the buffer cylinder using the two-zone method.
And the best thing is: this idea came from a specialist tradesman! He was so enthusiastic about the advantages of the rendeMIX 3×4that he didn't want to do without it when using his preferred Olymp eco "heating centre". And because he needed two mixed heating circuits but had no space in the heating cabinet, he converted the appliance without further ado. Nothing is impossible for a master of his trade.
But read for yourself in the special edition of the Heating Journal:"Save fittings, save assembly time"
Or see for yourself at the ISH in Frankfurt/Main from 10 to 14 March 2015 in Hall 9.0 on our stand F61