Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control Technology<br/>rendeMIX Multi-Port Mixing Manifold with 3/2-Way Tangential Mixing Valve DN25×G1½(a) MsGuss (green adapter) and 3-way mixing valve DN32×G1½(a) Ms58, valve body and cover Ms58<br/>For highly efficient utilization of the return flow from an unmixed high-temperature circuit (charging circuit) controlled by a diverter valve in a mixed low-temperature circuit (mixing circuit) by means of highly efficient operation of a system separation via flow control on a condensing boiler with minimum circulation<br/>Charging circuit: Actuator EMS 90-2P, 230V~ 50Hz 2.3VA 2-point signal, 6Nm (240h), 90°, 60s, right-closing, gray adapter. Mixing circuit: EMS 240 actuator, 230 V~ 50 Hz, 3.5 VA, 3-point signal, 5 Nm (240 h), 240°, 93s<br/>Dual-circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, Cu Ø35×1, DN32×G1½(a) flat, pipe spacing 100 mm<br/>2 integrated gravity brakes/backflow preventers, Dp 10 mbar<br/>Heating circuit (HT): Kvs = 13.3 × V'max[100 mbar] = 4.2 m³/h × Q'max[20 K] = 98 kW × Leak rate < 0.1% - Mixing circuit (low pressure) for system separation to be provided by the customer: Kvs = 9.7 × V'max[100 mbar] = 3.1 m³/h × Q'max[10 K] = 36 kW × Leak rate < 0.1%<br/>6 thermometers 0–120°C, Ø63 mm, solder sleeves Ms58<br/>6 ball valve fittings, straight-through DN25s, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handle<br/>Insulating molded shell, EPP 40 g/l, black, 450×450 mm, Quick-assembly kit<br/>Without pump flanges<br/>Assembly does NOT include a pump compensator – PAS L180 (Part No.: 001 338)<br/>Assembly does not include a pump<br/>Model DN 25 – heavy-duty version, PN 10 bar, Tmax 120°C<br/>CAUTION: CANNOT BE USED WITHOUT SYSTEM ISOLATION!

Performance data