Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control Technology<br/>rendeMIX Multi-Port Mixing Manifold with 3/3-Way Tangential Mixing Valve DN25×G1½(a) Ms Cast Iron (green adapter), valve and cover Ms58

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature boost as a mixing circuit and a separate flue gas condenser or two return connections

Actuator EMS 240, 230 V AC, 50 Hz, 3.5 VA, 3-point signal, 5 Nm (240 h), 240°, 93s<br/>Mixer assembly with 3 connections to the heat source and a separate charging circuit outlet, Cu Ø35×1, pipe spacing 100 mm, DN32×G1½(a) flat<br/>1 integrated backflow preventer, Dp 10 mbar, and 1 integrated flow differential pressure regulator, Dp 50–70 mbar<br/>Generator circuit (HT-RLA): Kvs = 5.1 × V'max[250 mbar] = 2.5 m³/h × Q'max[20K] = 58 kW × Leak rate < 0.1% - Condenser circuit (NT): Kvs = 4.8 × V'max[250 mbar] = 2.4 m³/h &#x95; Q'max[10 K] = 28 kW<br/>6 thermometers 0–120°C, Ø63 mm, solder sleeves Ms58<br/>6 ball valve fittings, straight-through DN25, PN32, G1½(i)×Rp1 flat-seal, stuffing box, sealing hole, stem with aluminum wing handle

EPP insulation shell 40 g/l, black, 300×450 mm, Quick-installation kit<br/>With pump flange G1½(i) for DN25 pump on the heat generator supply line (6)<br/>Assembly does NOT include a pump compensator – PAS L180 (Part No.: 001 338)<br/>Assembly does not include a pump<br/>Model DN 25 – lightweight version, PN 10 bar, Tmax 120°C<br/>CAUTION: DO NOT USE WITHOUT A FLOW TEMPERATURE LIMITER (VTB) THERMOSTATIC VALVE DN20, 20–70°C (Part No. 996 003)!

Performance data