Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control Technology

rendeMIX Multi-Port Mixing Manifold with 3/3-Way Tangential Mixing Valve DN25×G1½(a) Ms Cast Iron (red adapter), valve stem and cap Ms58

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature boost as a mixing circuit and a separate flue gas condenser or two return connections

EMS 240 actuator, 230 V AC, 50 Hz, 3.5 VA, 3-point signal, 5 Nm (240 h), 240°, 93sMixer assembly with 3 connections to the heat source and a separate charging circuit outlet, Cu Ø35×1, pipe spacing 100 mm, DN32×G1½(a) flat1 integrated backflow preventer, Dp 10 mbar, and 1 integrated flow differential pressure regulator, Dp 50–70 mbarGenerator circuit (HT-RLA): Kvs = 5.1 × V'max[250 mbar] = 2.5 m³/h × Q'max[20K] = 58 kW × Leak rate < 0.1% - Condenser circuit (NT): Kvs = 4.8 × V'max[250 mbar] = 2.4 m³/h • Q'max[10 K] = 28 kW6 thermometers 0–120°C, Ø63 mm, solder sleeves Ms586 ball valve fittings, straight-through DN25, PN32, G1½(i)×Rp1 flat-seal, stuffing box, sealing hole, stem with aluminum wing handle

Insulating molded shell, EPP 40 g/l, black, 300×450 mm, Quick-assembly kitWithout pump flangesAssembly does NOT include a pump compensator – PAS L180 (Part No.: 001 338)Assembly does not include a pumpModel DN 25 – lightweight version, PN 10 bar, Tmax 120°CATTENTION: DO NOT USE WITHOUT A SUPPLY TEMPERATURE LIMITER (VTB) THERMOSTATIC VALVE DN20, 20–70°C (Part No. 996 003)!

Performance data