Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control TechnologyrendeMIX Multi-Port Mixing Manifold with 3/3-Way Tangential Mixing Valve DN32×G1½(a) Ms Cast Iron (green adapter), valve body and cover Ms58

For highly efficient two-zone discharge of a buffer tank in a mixed low-temperature circuit while making highly efficient use of the return flow from an unmixed high-temperature circuitEMS 240 actuator, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93sTwo-circuit manifold assembly with 3 connections to the heat generator (buffer tank or boiler with flue gas heat exchanger), Cu Ø35×1, pipe spacing 100 mm, DN32×G1½(a) flat3 integrated gravity brakes/backflow preventers, Dp 10 mbarDirect heating circuit (HT): Kvs = 15.8 • V'max[100 mbar] = 5 m³/h • Q'max[20 K] = 116 kW - Mixing circuit (NT): Kvs = 18.9 • V'max[100 mbar] = 6 m³/h • Q'max[10 K] = 70 kW • Leak rate < 0.1%7 thermometers 0–120°C, Ø63 mm, solder sleeves Ms587 ball valve fittings, straight-through DN32, PN25, G1½(i)×Rp1¼ flat-seal, stuffing box, stem with square drive SW25Insulating molded shell EPP 40 g/l, black, 450×450 mm, Quick-installation kitWith pump flange G1½(i) for DN25 pump on the mixing circuit supply line (5)

Assembly includes ONE pump compensator—PAS L180—with G1½(a)×G1½(i) fittings for compensating a DN25 pump, length 180 mm, insulated (Part No.: 001 338)Assembly does not include a pumpModel DN 32, PN 10 bar, Tmax 120°C

Performance data