Assembly instructions

Assembly instructions: For specialist partners only.
Please log in here or register here

Data sheet

996109_MAL_ETR+1-230-3P_2019-08-07.pdf

GAEB

996109.D81

Tender text

Baunach article master data Version: 19.11.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

Isolating relay +1

For connecting ONE ADDITIONAL servomotor to a controller output with 230V~ 3-point signal. Several cut-off relays can be connected in series - and thus one additional actuator each can be connected to the controller signal.

Terminals U1: WITHOUT USE

Terminals U2: Through signals from the controller or to the first motor (230V~) OPEN/CLOSED L N

Terminals U3: Signals to the additional motor (230V~) OPEN/CLOSED N

Terminals U4: Through signals from the controller or to the first motor (230V~) OPEN/CLOSED L N

Terminals PE: potential earth (NOT required for rendeMIX actuator motors - protection class II)

Load on relay contacts: max. 250V~, max. 3A

Fuse protection power supply: max. 6A

Relay current consumption: 10mA

Working temperature: -10..+50°C, Storage temperature: -30..+80°C

DANGER OF LIFE: Operation only permitted in protective insulated housing 85×85×40mm!