rMIX DN32 2x4 R

Item no. 001 251 Return flow utilisation
For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Recommended accessories

								

Schl KuH DN32-50 set

996167
								

ISO KuH DN32 G1½(i)xRp1¼

996086

Further information?

Further questions?

Contact technical support
					

Configure product variant

Nominal width

DN32

Flow direction producer

Flow direction Producer Right

Product documentation

Assembly instructions

Assembly instructions: For specialist partners only.
Please log in here or register here

Actuator multi-way mixer: For specialist partners only.
Please log in here or register here

Spare parts drawing

Spare parts drawing For specialist partners only.
Please log in here or register here

Data sheet

001251_DBL_2020-02-26.pdf

GAEB

001251.D81

Tender text

Baunach article master data Version: 10.05.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX multi-port mixing manifold with 3/3-way tangential mixing valve DN32×G1½(a) MsGuss (red adapter), plug and cover Ms58

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s

Dual circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, CuØ35×1, DN32×G1½(a) flat, pipe spacing 100mm.

3 integrated gravity brakes/backflow preventer, Dp10mbar

Direct heating circuit (HT): Kvs = 15.8 - V'max[100mbar] = 5m³/h - Q'max[20K] = 116kW - Mixed heating circuit (LT): Kvs = 18.9 - V'max[100mbar] = 6m³/h - Q'max[10K] = 70kW - Leakage rate < 0,1%

6 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

6 ball valve screw connections, DN32 passage, PN25, G1½(i)×Rp1¼ flat-sealing, stuffing box, spindle with square drive SW25

Insulating moulded tray EPP 40g/l, black, 450×450mm, quick assembly kit

Without pump flanges

Assembly does NOT include pump compensator - PAS L180 (Part No.: 001 338)

Assembly does not contain a pump

Model DN 32, PN 10bar, Tmax 120°C

Performance data

Direct heating circuit (HT): Kvs = 15.8 - V'max[100mbar] = 5m³/h - Q'max[20K] = 116kW - Mixed heating circuit (LT): Kvs = 18.9 - V'max[100mbar] = 6m³/h - Q'max[10K] = 70kW - Leakage rate < 0,1%

Baunach