rMIX DN25 2x4 LH 15

				

					

						Item no. 001 012
						Return flow utilisation
						


						For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.						
						

										
				
											
						
						


						
Recommended accessories

													
								

									
										
										
									
									
										

											
												
											
											
												
DÜV DN15 2x2 MUL set L

												001344
													
										

									
								

																				
					
				
 

				
				

					

													

								
Further information?

								
							

							

								
Further questions?

								Contact technical support
														

															

						

					

				

			
 
			

		


		
					


	

	
	
	
	

		
Configure product variant

		

					

					

						
						
						

						

														
																
								
Nominal width

								

									
								
																										
																		
									
																		
								
																		
								
																																						

											DN25
										

									
								
																													

											DN25s
										

																		
								
																													

											DN32
										

																		
								
																		
								
																		
								
																		
								
																		
								
																											
								

								
													
 

						

													
 
						
						

													
 

						

						

						
								
															
Flow direction producer

								

																	
																					

												Flow direction Producer Left
											

										
								
																					

												Flow direction Producer Right
											

																		

															
						
 

																
						

							
															
						
 

						

							
															
						
 


						

							
													

						
						 
					
					

	


	

		
		
Product documentation

		

			

				

					
											
Assembly instructions

													

								Assembly instructions: For specialist partners only.
 Please log in here or register here
							

																	
																		

								Actuator multi-way mixer: For specialist partners only.
 Please log in here or register here
							

																

											
Spare parts drawing

													

								Spare parts drawing For specialist partners only.
 Please log in here or register here
							

											
											
Data sheet

												
001012_DBL_2020-02-26.pdf

					
											
GAEB

												
001012.D81

					
					
					
							


							
					

					


						
Tender text

						

							
							Baunach article master data Version: 10.05.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX multi-port mixing manifold with 3/3-way tangential mixing valve DN25×G1½(a) MsGuss (red adapter), plug and cover Ms58

For highly efficient use of the return flow of an unmixed high-temperature circuit in a mixed low-temperature circuit at a condensing boiler, a stratified tank or a heat transfer station.

Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s

Dual circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, CuØ35×1, DN32×G1½(a) flat, pipe spacing 100mm.

2 integrated gravity brakes/backflow preventer, Dp10mbar

Direct heating circuit (HT): Kvs = 6.2 - V'max[100mbar] = 2m³/h - Q'max[20K] = 47kW - Mixed heating circuit (LT): Kvs = 6.2 - V'max[100mbar] = 2m³/h - Q'max[10K] = 23kW - Leakage rate < 0,1%

6 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

6 ball valve unions, DN25 passage, PN32, G1½(i)×Rp1 flat-sealing, stuffing box, sealing hole, spindle with aluminium wing handle 

Insulating moulded tray EPP 40g/l, black, 450×450mm, quick assembly kit

With pump flanges G1½(i) for pumps DN25 at the heat generator flow (1) and mixing circuit flow (5)

Assembly does NOT include pump compensator - PAS L180 (Part No.: 001 338)

Assembly does not contain a pump

Model DN 25 - light version, PN 10bar, Tmax 120°C						

						


															
Performance data

								

									Direct heating circuit (HT): Kvs = 6.2 - V'max[100mbar] = 2m³/h - Q'max[20K] = 47kW - Mixed heating circuit (LT): Kvs = 6.2 - V'max[100mbar] = 2m³/h - Q'max[10K] = 23kW - Leakage rate < 0,1%								

														
 
					

				

			

		


		
		

		

	








	
			
			
						
			
		 
		
					
						

							

									
										Baunach