Data sheet

996089_DBL_2020-09-07_SMA.pdf

GAEB

996089.D81

Tender text

Baunach article master data Version: 19.11.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

Return temperature manifold DN25 20-70°C

For optimal feeding at buffer storage tanks in two zones of sources with fluctuating temperatures such as solar or fresh water modules.

Thermostatic return temperature distribution valve with adjustable distribution temperature 20-70°C.

Consisting of:

1) Three-way distribution valve, gunmetal, EPDM seal

DN32, DpN 250mbar, V'maxN 3.6m³/h, Kvs 7.2

PN 10bar, Tmax 120°C

Leads the return from input AB below the set temperature to the angled output B (marked blue) and above the set temperature to the straight output A (marked red).

2) Connection fittings:

a) 2x screw nipple insert, flat sealing, R1¼xG1½(i) (for union nut G1½), Ms (T.-Nr. 996 033)

b) 1x union nut compression fitting, flat sealing, DN32, G1½×Ø35, Rg (part no. 996 043)

3) Thermostatic head with spiral immersion sensor Setpoint range 20°C to 70°C, capillary tube length 2m

Capillary tube sealing compression fitting R½, spiral immersion sensor length 125mm

Reaction time approx. 5s, PN 10bar, Tmax 90°C (part no. 996 005)

ATTENTION: Immersion sensor touches heating water - provide shut-off on site!

4) Sensor connection

T-piece black for sensor Rp1¼x1¼x½ (part no. 996 057)