Assembly instructions

Assembly instructions: For specialist partners only.
Please log in here or register here

Actuator multi-way mixer: For specialist partners only.
Please log in here or register here

Spare parts drawing

Spare parts drawing For specialist partners only.
Please log in here or register here

Data sheet

001546_DBL_2021-12-21.pdf

GAEB

001546.D81

Tender text

Baunach article master data Version: 10.05.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX multi-port mixing manifold with 3/2-way tangential mixing valve DN25×G1½(a) MsGuss (adapter red), plug and cover Ms58

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixing circuit by means of highly efficient operation of a system separation via flow control (three-chamber manifold).

Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s

Return lifting group with 3 connections to the buffer tank, CuØ35×1, pipe spacing to the buffer tank 100mm, pipe spacing to the mixing circuit 200mm, DN32×G1½(a) flat

2 integrated gravity brakes/backflow preventer, Dp10mbar

Generator circuit (HT-RLA) with ST DN25s: Kvs = 10.2 - V'max[250mbar] = 5.1m³/h - Q'max[20K] = 119kW - Q'max[10K] = 59kW - Leakage rate < 0,1%

5 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

5 Ball valve screw connections, DN32 passage, PN25, G1½(i)×Rp1¼ flat-sealing, stuffing box, spindle with square drive SW25

Insulating moulded tray EPP 40g/l, black, 300×450mm, quick assembly kit

With pump flange G1½(i) for pump DN25 on mixed heat generator return (5)

Assembly includes ONE pump balancing piece - PAS L180 - with G1½(a)×G1½(i) fittings for balancing one pump DN25, length 180mm, insulated (part no.: 001 338).

Assembly does not contain a pump

Model DN 25 - manifold assembly for manifold connection from LEFT, PN 10bar, Tmax 120°C

ATTENTION: CANNOT BE USED WITHOUT SYSTEM SEPARATION!