Actuator three-way mixer: For specialist partners only.
Please log in here or register here

Spare parts drawing

Spare parts drawing For specialist partners only.
Please log in here or register here

Data sheet

001371_DBL_2021-04-01.pdf

Tender text

Baunach article master data Version: 10.05.24

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX changeover valve with a 3-way changeover valve DN32×G1½(a) Ms58, plug and cover Ms58

For highly efficient two-zone charging of a buffer storage tank with priority hot water preparation by a heat generator with minimum temperature release WITHOUT water volume compensation (hydraulic separator) via NT circuit of the buffer storage tank to the manifold.

Actuator EMS 90-2P, 230V~ 50Hz 2.3VA 2-point signal, 6Nm (240h), 90°, 60s, closing left, grey adapter

Switching assembly with 2 connections to the manifold and 3 connections to the buffer tank, CuØ35×1, pipe spacing to the manifold 100mm, pipe spacing to the buffer tank 100mm, DN32×G1½(a) flat.

1 integrated backflow preventer, Dp10mbar and 1 integrated return differential pressure regulator, Dp50-70mbar

Generator circuit (HT): Kvs = 13.6 - V'max[250mbar] = 6.8m³/h - Q'max[20K] = 158kW - Q'max[10K] = 79kW - Leakage rate < 0,1%

4 thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

5 Ball valve screw connections, DN32 passage, PN25, G1½(i)×Rp1¼ flat-sealing, stuffing box, spindle with square drive SW25

Insulating moulded tray EPP 40g/l, black, 300×450mm, quick assembly kit

With pump flange G1½(i) for pump DN25 at the heat generator flow of the manifold (1)

Assembly includes ONE pump balancing piece - PAS L180 - with G1½(a)×G1½(i) fittings for balancing one pump DN25, length 180mm, insulated (part no.: 001 338).

Assembly does not contain a pump

Model DN 25 - manifold assembly for manifold connection from RIGHT, PN 10bar, Tmax 120°C