Assembly instructions

Assembly instructions: For specialist partners only.
Please log in here or register here

Actuator multi-way mixer: For specialist partners only.
Please log in here or register here

Spare parts drawing

Spare parts drawing For specialist partners only.
Please log in here or register here

Data sheet

001088_DBL_2021-12-21.pdf

Tender text

Baunach article master data Version: 22.11.23

BAFA funding opportunity as part of heating system optimisation through hydraulic balancing and installation of separate control technology

rendeMIX multi-port mixing manifold with 3/3-way tangential mixing valve DN25×G1½(a) MsGuss (red adapter), plug and cover Ms58

For highly efficient two-zone charging of a buffer tank by a heat generator with return temperature increase as a mixed circuit and separate flue gas condenser or two return connections.

Actuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s

Mixer assembly with 3 connections to the heat source and separate charging circuit output, CuØ35×1, pipe spacing 100mm, DN32×G1½(a) flat

1 integrated backflow preventer, Dp10mbar and 1 integrated flow differential pressure regulator, Dp50-70mbar

Erzeugerkreis (HT-RLA): Kvs = 5,1 • V'max[250mbar] = 2,5m³/h • Q'max[10K] = 58kW • Leckrate < 0,1% - Condenserkreis (NT): Kvs = 4,8 • V'max[250mbar] = 2,4m³/h • Q'max[20K] = 56kW

6 Thermometers 0-120°C, Ø63mm, soldering sleeves Ms58

6 ball valve unions, DN25 passage, PN32, G1½(i)×Rp1 flat-sealing, stuffing box, sealing hole, spindle with aluminium wing handle

Insulating moulded tray EPP 40g/l, black, 300×450mm, quick assembly kit

Without pump flanges

Assembly does NOT include pump compensator - PAS L180 (Part No.: 001 338)

Assembly does not contain a pump

Model DN 25 - light version, PN 10bar, Tmax 120°C

ATTENTION: CANNOT BE USED WITHOUT PRE-RUN TEMPERATURE LIMITER (VTB) THERMOSTAT VALVE DN20, 20 - 70°C (part no. 996 003)!