Tender text

Stainless steel upright drinking water storage heater, energy efficiency class BWith two permanently installed smooth-tube heat exchangers For efficient, fast, and hygienic drinking water heatingContinuous output for drinking water heating:

bottom: 31 kW (85/50°C) = 12.7 l/min (10/45°C) | 13 kW (55/45°C) = 6.3 l/min (10/45°C)top: 20 kW (85/50°C) = 8.2 l/min (10/45°C) | 8 kW (55/45°C) = 3.3 l/min (10/45°C)Total: 51 kW (85/50°C) = 20.9 l/min (10/45°C) NL = 10 | 21 kW (55/45°C) = 8.6 l/min (10/45°C) NL = 5Tank: Capacity = 300 liters, H 1,615 mm, Ø 500 mm, m = 100 kgPN 10 bar, Tmax 95°C, Material: Stainless steel 1.4571 (X6CrNiMoTi17-12-2), AISI 316Ti, V4A (chlorine-resistant up to 300 mg/l)with 3 sensor terminal blocks for sensors Ø 6–12 mmhygienic bottom-mounted heating, cold water inlet with baffle plate for flow attenuationHeat exchanger: Heating surface, bottom: 1.4 m², top: 0.9 m²PN 25 bar, Tmax 160°C, material: stainless steel 1.4571 (X6CrNiMoTi17-12-2), AISI 316Ti, V4A (chlorine-resistant up to 300 mg/l)Insulation: polyester fleece, 100 mm thick, flame-retardant; outer jacket: silver-gray polystyrene; lid: black polystyrene: H = 1,712 mm, Ø 700 mmThermometer: 0–120°C, Class 1, Ø 100 mm with stainless steel immersion sleeve R½ (material 1.4571)Connections: Cold/hot water G1(a), circulation G¾(i), vent Rp1, thermometer Rp½, heating coil G1¼(a), manhole 120/180 mmDelivery: complete in plastic wrap on an 80x80 cm pallet

Performance data