Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control TechnologyrendeMIX Multi-Port Mixing Manifold with 3/2-Way Tangential Mixing Valve DN25×G1½(a) MsGuss (green adapter) and 3-way mixing valve DN32×G1½(a) Ms58, valve body and cover Ms58For highly efficient two-zone discharge of a buffer tank in a mixed low-temperature circuit (2nd mixing circuit) through highly efficient operation of a system separation via flow control, utilizing the return flow from a mixed high-temperature circuit (1st mixing circuit) in a highly efficient manner1st mixing circuit: Actuator EMS 90-3P, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 90°, 70s, gray adapter. 2nd mixing circuit: EMS 240 actuator, 230 V~ 50 Hz, 3.5 VA, 3-point signal, 5 Nm (240 h), 240°, 93sDual-circuit manifold assembly with 3 connections to the heat generator (buffer tank or boiler with flue gas heat exchanger), Cu Ø35×1, pipe spacing 100 mm, DN32×G1½(a) flat3 integrated gravity brakes/backflow preventers, Dp 10 mbar1st mixing circuit (HT): Kvs = 13.3 • V'max[100 mbar] = 4.2 m³/h • Q'max[20K] = 98 kW • Leak rate < 0.1% - 2nd mixing circuit (low pressure) for system separation to be provided by the customer: Kvs = 9.7 • V'max[100 mbar] = 3.1 m³/h • Q'max[10 K] = 36 kW • Leak rate < 0.1%7 thermometers 0–120°C, Ø63 mm, solder sleeves Ms587 ball valve fittings, straight-through DN25s, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handleEPP insulation mold 40 g/l, black, 450×450 mm, Quick-assembly kitWithout pump flangesAssembly does NOT include a pump compensator – PAS L180 (Part No.: 001 338)Assembly does not include a pumpModel DN 25 – heavy-duty version, PN 10 bar, Tmax 120°CCAUTION: CANNOT BE USED WITHOUT SYSTEM ISOLATION!

Performance data