Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of separate control technologyrendeMIX dual-switching mixing valve consisting of a 3-way switching valve and a 3-way mixing valve, both DN32×G1½(a) Ms58, spindle and cover Ms58For constant regulation of the flow temperature in domestic hot water systems using buffer tanks (precise top-loading) and for highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation during heating operation and when domestic hot water production takes prioritySwitching circuit: EMS 90-2P actuator, 230V~ 50Hz 2.3VA 2-point signal, 6Nm (240h), 90°, 60s, right-closing, gray adapter. Mixing circuit: Actuator EMS 90-3P, 230 V~ 50 Hz, 3.5 VA, 3-point signal, 5 Nm (240 h), 90°, 70 s, gray adapterChangeover assembly with 3 connections to the buffer tank, Cu Ø35×1, pipe spacing to the heat generator 200 mm, pipe spacing to the buffer tank 100 mm, DN32×G1½(a) flat1 integrated gravity brake/backflow preventer, Dp 10 mbarGenerator circuit (NT): Kvs = 9.4 • V'max[250 mbar] = 4.7 m³/h • Q'max[20 K] = 109 kW • Q'max[10K] = 55 kW • Leak rate < 0.1%5 thermometers 0–120°C, Ø63 mm, solder sleeves Ms585 ball valve fittings, straight-through DN25, PN32, G1½(i)×Rp1 flat-seal, stuffing box, sealing hole, spindle with aluminum wing handle

EPP insulation mold, 40 g/l, black, 300×450 mm, Quick-installation kitWith pump flange G1½(i) for DN25 pump on the heat generator return (3)Assembly does NOT include a pump compensator – PAS L180 (Part No.: 001 338)Assembly does not include a pumpModel DN 25 – lightweight version, PN 10 bar, Tmax 120°C

Performance data