Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of separate control technologyrendeMIX multi-port mixing manifold with 3/2-way tangential mixing valve DN25×G1½(a) MsGuss (red adapter), valve body and cover Ms58For highly efficient two-zone discharge of an rSTROR C buffer storage tank via a mixing circuit through highly efficient operation of a system separation using flow control, Connection ABOVE a ball valve connection setActuator EMS 240, 230 V~ 50 Hz 3.5 VA 3-point signal, 5 Nm (240 h), 240°, 93sSingle-circuit mixer assembly with 3 connections to the heat source, Cu Ø35×1, DN32×G1½(a) flat, pipe spacing to the heat source 100 mm, pipe spacing to the mixing circuit 200 mm2 integrated gravity brakes/backflow preventers, Dp 10 mbarMixing circuit (NT) with ST DN25s: Kvs = 7.2 • V'max[100 mbar] = 2.3 m³/h • Q'max[20 K] = 53 kW • Q'max[10 K] = 27 kW • Leak rate < 0.1%5 thermometers 0–120°C, Ø63mm, solder sleeves Ms582 ball valve fittings, straight-through DN25s, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handleEPP insulation mold, 40 g/l, black, 300×450 mm, Quick-installation kitWith pump flange G1½(i) for DN25 pump on the mixing circuit supply line (5)

Assembly includes ONE pump compensator—PAS L180—with G1½(a)×G1½(i) fittings for compensating a DN25 pump, length 180 mm, insulated (Part No.: 001 338)With blind fitting consisting of a G1½ brass union nut, stainless steel washer, and insulation capModel DN 25 – lightweight version, PN 10 bar, Tmax 120°CCAUTION: NOT TO BE USED WITHOUT SYSTEM ISOLATION!

Performance data