Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of separate control technology

rendeMIX open manifold assembly with integrated diverter

For connecting an unmixed high-temperature circuit with an additional hydraulic diverter to maintain a minimum flow rate in the heat generator in combination with a highly efficient rendeMIX heat distribution system (two- or three-chamber manifold)

Without actuator<br/>Unmixed manifold assembly with 2 connections to the heat source, Cu Ø35×1, pipe spacing to the heat source (manifold) 100 mm, pipe spacing to the unmixed high-temperature load 200 mm, DN32×G1½(a) flat

2 integrated gravity brakes/backflow preventers, Δp 10 mbar

4 thermometers 0–120°C, Ø63 mm, solder sleeves Ms58<br/>4 ball valve fittings, passage DN32, PN25, G1½(i)×Rp1¼ flat-sealing, stuffing box, stem with square drive SW25<br/>EPP insulation shell 40 g/l, black, 300×450 mm, Quick-installation kit<br/>With pump flange G1½(i) for DN25 pump on the unmixed heating circuit supply line (3)<br/>Assembly does NOT include a pump compensator – PAS L180 (Part No.: 001 338)<br/>Assembly does not include a pump<br/>Model DN 25 – Manifold assembly for manifold connection from the LEFT, PN 10 bar, Tmax 120°C