Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control Technology

rendeMIX Open Manifold Assembly with Integrated Splitter

For connecting an unmixed high-temperature circuit with an additional hydraulic diverter to maintain a minimum flow rate in the heat generator in combination with a highly efficient rendeMIX heat distribution system (two- or three-chamber manifold)

Without actuator<br/>Unmixed manifold assembly with 2 connections to the heat source, Cu Ø35×1, pipe spacing to the heat source (manifold) 100 mm, pipe spacing to the unmixed high-temperature load 200 mm, DN32×G1½(a) flat

2 integrated gravity brakes/backflow preventers, Δp 10 mbar

4 thermometers 0–120°C, Ø63 mm, solder sleeves Ms58<br/>4 ball valve fittings, passage DN32, PN25, G1½(i)×Rp1¼ flat-sealing, stuffing box, stem with square drive SW25<br/>EPP insulation mold 40 g/l, black, 300×450 mm, Quick-assembly kit<br/>Without pump flanges<br/>Assembly does NOT include pump compensator – PAS L180 (Part No.: 001 338)<br/>Assembly does not include a pump<br/>Model DN 25 – Distributor assembly for distributor connection from the RIGHT, PN 10 bar, Tmax 120°C