Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of separate control technologyrendeMIX dual-switch valve consisting of two 3-way switching valves DN32×G1½(a) Ms58, valve body and cap Ms58For highly efficient two-zone loading of a buffer tank by a heat generator with minimum circulation in heating mode and during priority domestic hot water production; connection ABOVE a ball valve connection set, FULL LOADING of the heating zone (up to the blue connection)2 EMS 90-2P actuators, 230 V~ 50 Hz 2.3 VA 2-point signal, 6 Nm (240 h), 90°, 60s, right-closing, gray adapterChangeover assembly with 3 connections to the buffer tank, Cu Ø35×1, pipe spacing from the heat generator 200 mm, pipe spacing to buffer tank 100 mm, DN32×G1½(a) flat1 integrated gravity brake/backflow preventer, Dp 10 mbarGenerator circuit (NT): Kvs = 9.4 × V'max[250 mbar] = 4.7 m³/h × Q'max[20 K] = 109 kW × Q'max[10K] = 55 kW × Leak rate < 0.1%5 thermometers 0–120°C, Ø63 mm, solder sleeves Ms582 ball valve fittings, straight-through DN25, PN32, G1½(i)×Rp1 flat-seal, stuffing box, sealing hole, spindle with aluminum wing handle

Insulating molded shell, EPP 40 g/l, black, 450×450 mm, Quick-assembly kitWithout pump flangesAssembly does NOT include pump compensator – PAS L180 (Part No.: 001 338)With blind fitting consisting of a G1½ brass union nut and a stainless steel washerModel DN 25 – lightweight version, PN 10 bar, Tmax 120°C

Performance data