Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of separate control technology<br/>rendeMIX dual-switching mixing valve consisting of a 3-way switching valve and a 3-way mixing valve, both DN32×G1½(a) Ms58, spindle and cover Ms58<br/>For constant regulation of the flow temperature in domestic hot water systems using buffer tanks (precise top-loading) and for highly efficient two-zone charging of a buffer storage tank by a heat generator with minimum circulation during heating operation and when domestic hot water production takes priority, connection BELOW a ball valve connection set, FULL LOADING of the heating zone (up to the blue connection)<br/>Switching circuit: Actuator EMS 90-2P, 230V~ 50Hz 2.3VA 2-point signal, 6Nm (240h), 90°, 60s, left-closing, gray adapter. Mixing circuit: EMS 90-3P actuator, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 90°, 70s, gray adapter<br/>Changeover assembly with 3 connections to the buffer tank, Cu Ø35×1, pipe spacing to the heat generator 200 mm, pipe spacing to the buffer tank 100 mm, DN32×G1½(a) flat<br/>1 integrated gravity brake/backflow preventer, Dp 10 mbar<br/>Generator circuit (NT): Kvs = 10.1 &#x95; V'max[250 mbar] = 5.1 m³/h &#x95; Q'max[20 K] = 119 kW &#x95; Q'max[10 K] = 59 kW &#x95; Leak rate < 0.1%<br/>5 thermometers 0–120°C, Ø63 mm, Ms58 solder sleeves<br/>2 ball valve fittings, DN25s passage, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handle<br/>EPP insulation mold, 40 g/l, black, 450×450 mm, Quick-assembly kit<br/>Without pump flanges<br/>Assembly does NOT include pump compensator – PAS L180 (Part No.: 001 338)<br/>With blind fitting consisting of a G1½ brass union nut and a stainless steel washer<br/>Model DN 25 – heavy-duty version, PN 10 bar, Tmax 120°C

Performance data