Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of separate control technologyrendeMIX double-switch valve consisting of two DN32×G1½(a) Ms58 3-way switching valves, spindle and cap Ms58For highly efficient two-zone loading of a buffer tank by a heat generator with minimum circulation in heating mode and during priority domestic hot water production; connection BELOW a ball valve connection set, PARTIAL LOADING of the heating zone (up to the purple connection)2 EMS 90-2P actuators, 230V~ 50Hz 2.3VA 2-point signal, 6Nm (240h), 90°, 60s, left-closing, gray adapterSwitching assembly with 3 connections to the buffer tank, Cu Ø35×1, pipe spacing to the heat generator 200 mm, pipe spacing to buffer tank 100 mm, DN32×G1½(a) flat1 integrated gravity brake/backflow preventer, Dp 10 mbarGenerator circuit (NT): Kvs = 10.1 • V'max[250 mbar] = 5.1 m³/h • Q'max[20 K] = 119 kW • Q'max[10 K] = 59 kW • Leak rate < 0.1%5 thermometers 0–120°C, Ø63mm, solder sleeves Ms582 ball valve fittings, DN25s, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handleEPP insulation mold, 40 g/l, black, 300×450 mm, quick-assembly kitWithout pump flangesAssembly does NOT include pump compensator – PAS L180 (Part No.: 001 338)With blind fitting consisting of a G1½ brass union nut, stainless steel washer, and insulating capModel DN 25 – heavy-duty version, PN 10 bar, Tmax 120°C

Performance data