Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control TechnologyrendeMIX Multi-Port Mixing Manifold with 3/2-Way Tangential Mixing Valve DN25×G1½(a) Ms Cast Iron (red adapter), valve and cover Ms58For highly efficient two-zonedischarge of an rSTOR C buffer tank in a mixed low-temperature circuit with highly efficient utilization of the return flow from an unmixed high-temperature circuit via highly efficient operation of a system separation using flow control, Connection ABOVE a ball valve connection setActuator EMS 240, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93sDual-circuit manifold assembly with 3 connections to the heat generator (buffer tank or boiler with flue gas heat exchanger), Cu Ø35×1, pipe spacing 100 mm, DN32×G1½(a) flat3 integrated gravity brakes/backflow preventers, Dp 10 mbarDirect heating circuit (HT): Kvs = 11.9 • V'max[100 mbar] = 3.8 m³/h • Q'max[20 K] = 88 kW - Mixing circuit (NT) with ST DN25s: Kvs = 7.2 • V'max[100 mbar] = 2.3 m³/h • Q'max[10 K] = 27 kW • Leak rate < 0.1%7 thermometers 0–120°C, Ø63 mm, solder sleeves Ms584 ball valve fittings, straight-through DN25s, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handleEPP insulation mold, 40 g/l, black, 450×450 mm, Quick-installation kitWith G1½(i) pump flanges for DN25 pumps on the unmixed heating (3) and mixing circuit supply (5)

Assembly includes TWO pump compensators—PAS L180—with G1½(a)×G1½(i) fittings for compensating a DN25 pump, length 180 mm, insulated (Part No.: 001 338)With a blind fitting consisting of a G1½ brass union nut and a stainless steel washerModel DN 25—heavy-duty version, PN 10 bar, Tmax 120°CCAUTION: NOT TO BE USED WITHOUT SYSTEM ISOLATION!

Performance data