Tender text

BAFA funding opportunity for heating system optimization through hydraulic balancing and the installation of separate control technology<br/>rendeMIX multi-port mixing manifold with 3/3-way tangential mixing valve DN25×G1½(a) MsGuss (red adapter), valve and cover Ms58<br/>For highly efficient utilization of the return flow from high-temperature circuits in a mixed low-temperature circuit (two- or three-chamber manifold) or for highly efficient two-zone discharge of a buffer tank via a mixing circuit (three-chamber manifold)<br/>Actuator EMS 240, 230 V AC, 50 Hz, 3.5 VA, 3-point signal, 5 Nm (240 h), 240°, 93s<br/>Single-circuit mixer assembly with 3 connections to the heat source, Cu Ø35×1, DN32×G1½(a) flat, pipe spacing to the heat source 100 mm, pipe spacing to the mixing circuit 200 mm<br/>2 integrated gravity brakes/backflow preventers, Dp 10 mbar<br/>Mixing circuit (NT): Kvs = 12.9 &#x95; V'max[100 mbar] = 4.1 m³/h &#x95; Q'max[20 K] = 95 kW &#x95; Q'max[10 K] = 48 kW &#x95; Leak rate < 0.1%<br/>5 thermometers 0–120°C, Ø63 mm, solder sleeves Ms58<br/>5 ball valve fittings, straight-through DN32, PN25, G1½(i)×Rp1¼ flat-seal, stuffing box, stem with square drive SW25<br/>EPP insulation mold, 40 g/l, black, 300×450 mm, Quick-assembly kit<br/>Without pump flanges<br/>Assembly does NOT include pump compensator – PAS L180 (Part No.: 001 338)<br/>Assembly does not include a pump<br/>Model DN 25 – Distributor assembly for distributor connection from the RIGHT, PN 10 bar, Tmax 120°C

Performance data