Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control Technology<br/>rendeMIX Multi-Port Mixing Manifold with 3/2-Way Tangential Mixing Valve DN25×G1½(a) Ms Cast Iron (red adapter), valve and cover Ms58<br/>For highly efficient two-zone discharge of an rSTOR C buffer storage tank in a mixed low-temperature circuit (2nd mixing circuit) via highly efficient operation of a system separation using flow control, with highly efficient utilization of the return flow from a mixed high-temperature circuit; connection ABOVE a ball valve connection set (1st mixing circuit),

1. Mixing circuit: Actuator EMS 90-3P, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 90°, 70s, gray adapter. 2nd mixing circuit: EMS 240 actuator, 230 V~ 50 Hz 3.5 VA 3-point signal, 5 Nm (240 h), 240°, 93s<br/>Dual-circuit manifold assembly with 3 connections to the heat generator (buffer tank or boiler with flue gas heat exchanger), Cu Ø35×1, pipe spacing 100 mm, DN32×G1½(a) flat<br/>2 integrated gravity brakes/backflow preventers, Dp 10 mbar<br/>1st mixing circuit (HT): Kvs = 12.5 &#x95; V'max[100 mbar] = 4 m³/h &#x95; Q'max[20K] = 93 kW &#x95; Leakage rate < 0.1% - 2nd mixing circuit (NT) for system separation to be provided by the customer: Kvs = 9.4 &#x95; V'max[100 mbar] = 3 m³/h &#x95; Q'max[10 K] = 35 kW &#x95; Leak rate < 0.1%<br/>7 thermometers 0–120°C, Ø63 mm, solder sleeves Ms58<br/>4 ball valve fittings, straight-through DN25, PN32, G1½(i)×Rp1 flat-seal, stuffing box, sealing hole, stem with aluminum wing handle

EPP insulation mold shell, 40 g/l, black, 450×450 mm, Quick-assembly kit<br/>Without pump flanges<br/>Assembly does NOT include pump compensator – PAS L180 (Part No.: 001 338)<br/>With blind fitting consisting of a G1½ brass union nut and a stainless steel washer<br/>Model DN 25—lightweight version, PN 10 bar, Tmax 120°C<br/>CAUTION: CANNOT BE USED WITHOUT SYSTEM ISOLATION!

Performance data