Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control Technology<br/>rendeMIX Multi-Port Mixing Manifold with 3/2-Way Tangential Mixing Valve DN25×G1½(a) Ms Cast Iron (green adapter), valve and cover Ms58

TWIN module for expanding a rendeMIX 2x4 module to include an additional low-temperature mixing circuit that utilizes the return flow from the high-temperature circuit and ensures highly efficient operation of system separation via flow control<br/>Actuator EMS 240, 230 V AC, 50 Hz, 3.5 VA, 3-point signal, 5 Nm (240 h), 240°, 93s<br/>Dual-circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, Cu Ø35×1, DN32×G1½(a) flat, pipe spacing 100 mm<br/>2 integrated gravity brakes/backflow preventers, Dp 10 mbar<br/>Downstream assembly (HT): Kvs = 13.9 × V'max[100 mbar] = 4.4 m³/h × Q'max[20 K] = 102 kW - Additional mixing circuit (NT) with ST DN25s: Kvs = 7.2 × V'max[100 mbar] = 2.3 m³/h × Q'max[10 K] = 27 kW × Leak rate < 0.1%<br/>4 thermometers 0–120°C, Ø63 mm, solder sleeves Ms58<br/>2 ball valve fittings, straight-through DN25s, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handle<br/>EPP insulation mold 40 g/l, black, 450×450 mm, Quick-installation kit<br/>With G1½(i) pump flanges for DN25 pumps on the heat generator supply line (1) and mixing circuit supply line (5)

Assembly includes TWO pump compensators—PAS L180—with G1½(a)×G1½(i) fittings to compensate for a DN25 pump, length 180 mm, insulated (Part No.: 001 338)<br/>Assembly does not include a pump<br/>Model DN 25 – heavy-duty version, PN 10 bar, Tmax 120°C<br/>CAUTION: CANNOT BE USED WITHOUT SYSTEM ISOLATION!

Performance data