Tender text

BAFA Funding Opportunity for Heating System Optimization Through Hydraulic Balancing and Installation of Separate Control Technology<br/>rendeMIX Multi-Port Mixing Manifold with 3/3-Way Tangential Mixing Valve DN25×G1½(a) Ms Cast Iron (red adapter), valve and cover Ms58<br/>TWIN module for expanding a rendeMIX 2x4 module with an additional low-temperature mixing circuit utilizing the return flow from the high-temperature circuit<br/>EMS 240 actuator, 230V~ 50Hz 3.5VA 3-point signal, 5Nm (240h), 240°, 93s<br/>Dual-circuit manifold assembly with 2 connections to the heat source and 4 connections to the heat sinks, Cu Ø35×1, DN32×G1½(a) flat, pipe spacing 100 mm<br/>2 integrated gravity brakes/backflow preventers, Dp 10 mbar<br/>Downstream assembly (HT): Kvs = 13.9 × V'max[100 mbar] = 4.4 m³/h × Q'max[20 K] = 102 kW - Additional mixing circuit (NT): Kvs = 12.9 × V'max[100 mbar] = 4.1 m³/h × Q'max[10 K] = 48 kW × Leak rate < 0.1%<br/>4 thermometers 0–120°C, Ø63mm, solder sleeves Ms58<br/>2 ball valve fittings, straight-through DN25s, PN20, G1½(i)×Rp1 flat-seal, stuffing box, stem with nylon T-handle<br/>EPP insulation mold, 40 g/l, black, 450×450 mm, Quick-installation kit<br/>With pump flange G1½(i) for DN25 pump on the mixing circuit supply line (5)

Assembly includes TWO pump compensators—PAS L180—with G1½(a)×G1½(i) fittings to compensate for a DN25 pump, length 180 mm, insulated (Part No.: 001 338)<br/>Assembly does not include a pump<br/>Model DN 25 – heavy-duty version, PN 10 bar, Tmax 120°C

Performance data