Data sheet

001932_DBL_2016-10-04-PN.pdf

GAEB

001932.D81

Tender text

Baunach article master data Version: 19.11.24

Stainless steel drinking water storage heater in upright design, energy efficiency class B

With two permanently installed smooth-tube heat exchangers For efficient, fast and hygienic heating of drinking water

Continuous output for DHW heating:

down: 20 kW (85/50°C) = 8,2 l/min (10/45°C) | 8 kW (55/45°C) = 3,3 l/min (10/45°C)

up: 20 kW (85/50°C) = 8,2 l/min (10/45°C) | 8 kW (55/45°C) = 3,3 l/min (10/45°C)

total: 40 kW (85/50°C) = 16.4 l/min (10/45°C) NL = 5 | 16 kW (55/45°C) = 6.6 l/min (10/45°C) NL = 3

Tank: capacity = 200 litres, h 1,362 mm, Ø 500 mm, m = 75 kg

PN 10 bar, Tmax 95°C, Material: Stainless steel 1.4571 (X6CrNiMoTi17-12-2), AISI 316Ti, V4A (chlorine-resistant up to 300 mg/l)

with 3 sensor terminal strips for sensor Ø 6-12 mm

Hygienic heating close to the floor, cold water inlet with baffle plate for flow damping

Heat exchanger: heating surface bottom: 0.9 m², top: 0.9 m²

PN 25bar, Tmax 160°C, material: stainless steel 1.4571 (X6CrNiMoTi17-12-2), AISI 316Ti, V4A (chlorine-resistant up to 300 mg/l)

Insulation: polyester fleece, 100 mm thick, flame retardant, outer jacket: polystyrene silver grey, cover: polystyrene black: H = 1,462 mm, Ø 700 mm

Thermometer: 0-120°C, cl. 1, Ø 100 mm with stainless steel immersion sleeve R½ (material 1.4571)

Connections: Cold/hot water G1(a), circulation G¾(i), vent Rp1, thermometer Rp½, heating coil G1(a), hand hole 120/180 mm

Delivery: complete in foil packaging on pallet 80x80 cm