New - Return flow utilisation on hot water tanks!
Have you ever asked yourself why you can't use the hot return of hot water tanks to supply a heating circuit with it? The whole thing would save you a lot of energy if there were a way.
We would now like to present this possibility to you!
Save more energy costs
Because the rMIX 250 2×4+UV is additionally equipped with a change-over valve for hot water preparation, the return water of the hot water tank can be used and fed to the second heating circuit. In this way, the return water of the hot water tank is used effectively and efficiently to save further energy costs!
For which systems is the rMIX 250 2×4+UV intended and what should be considered?
Mainly the rMIX 250 2×4+UV has been designed for systems without a buffer tank, in which the hot water is prepared via a hot water tank and at least one heating circuit is available.
When planning and executing the system, make sure that the control system supports hot water preparation in parallel with heating operation and that your control system can control a mixing circuit. If the heat generator has a built-in switchover valve or a second pump for switching to hot water mode, take into account that the switchover valve in the rMIX 250 2×4+UV this function takes over
More hydraulic plans
Hot water preparation (solar-assisted) with therme (internal pump)
Hot water preparation (not solar-assisted) with therme (internal pump)
Hot water preparation (solar-assisted) with boiler (external pump)
Hot water preparation (not solar-assisted) with boiler (external pump)
In our Hydraulic plan finder you can search for and download the appropriate plan for your system step by step. If you cannot find a suitable plan, simply write to us!